ES-712 Microemulsion Cutting Fluid

Product brief introduction
    ES-712 Microemulsion Cutting fluid is mainly composed of high-grade raw cutting material refined mainly used in ferrous metal, with lubrication, anti-rust, cleaning, cooling and other functions, the lubrication performance is good, good antirust effect.
Product features
●Lubrication: can extend tool life, improve workpiece brightness.
●rust: have good anti-rust capability for steel and cast iron parts, with the process of antirust effect.
●Economy: can use multiple dilution, anti-foam, long use period.
●security : the product of machine tool equipment, iron and steel parts, no corrosion, harmless to the human body, to meet the requirements of environmental protection, no pollution of the environment.
Use
Mainly used for ferrous metal in the cutting, grinding process of lubrication, cleaning, cooling, rust.
Method of use
●ES-712 Microemulsion Cutting Fluid before use, should choose the appropriate cleaning agents to thoroughly clean liquid metal processing, the original chips and dirt tank and equipment.
●preparation method : use a clean water according to a certain proportion of dilute this product, and uniformly stirring.
●recommended concentration:
Grinding: 4% ~ 5%. Moderate processing: 4% ~ 5%.
Cutting: 5% ~ 8%. Severe processing: 5% ~ 10%.
Can be adjusted using concentration according to the processing workpiece material, machining requirements.
●is in use, the cutting fluid will become dirty because of growing pollution, oil and iron too much should be timely cleaning, cutting fluid if black or odor should be updated according to the number of cutting emissions, workload, cutting fluid every 3 months or so to discharge an update, usually should be regular monitoring pH and concentration box liquid, and adding ES-712 Microemulsion Cutting fluid, to maintain the necessary concentration.
Matters needing attention
●If the goods in the cooler temperature stratification or thickening. But not the product performance change. Before use, the heating to room temperature . Stir and use.
●Cutting liquid with good if it is not used for a long time in the machine, should be regularly carried out air circulation and oxygenation of the tank liquid.
●summer high temperature, grinding fluid use cycle and antirust period than other season is short, please use.
●this product should be stored in dry, cool, ventilated warehouse, avoid the solarization, drench to storage, storage temperature of 0~40℃.
Package specification
25KG/ barrel; 200KG/ barrel