Product brief introduction
ES-732 Microemulsion Cutting Fluid mainly consists of base oil, lubricant, antirust additive, corrosion inhibitor, stabilizer, preservative and the like, is mainly used for cutting aluminum, copper, alloy material, with lubrication, anti-rust, anti-corrosion, excellent cooling effect.
Product features
●Lubrication: can extend tool life, improve processing brightness and feed and feed efficiency.
●to maintain stability of the biological stability of cutting fluid for long time, no smell, no mildew.
●Economy: can use multiple dilution, anti-foam, long use period, very economic.
●security: This product on the iron parts and skin machine, steel, no corrosion, meet the requirements of environmental protection, no pollution of the environment.
Use
●Mainly used in aluminum, copper, alloy material cutting process lubrication, cleaning, cooling, rust.
●suitable for single liquid supply and large flow of concentrated liquid exchange.
Method of use
●ES-732 Microemulsion Cutting Fluid before use, should use the appropriate cleaning agent to thoroughly clean liquid metal processing, the original chips and dirt tank and equipment.
●preparation method : use a clean water according to a certain proportion of dilute this product, and uniformly stirring.
●recommended concentration:
Grinding: 4% ~ 5%. Moderate processing: 4% ~ 5%.
Cutting: 5% ~ 8%. Severe processing: 5% ~ 10%.
Can be adjusted using concentration according to the processing workpiece material, machining requirements.
●is in use, the cutting fluid will become dirty because of growing pollution, oil and chip too much should be timely cleaning, cutting fluid if black or odor should be updated according to the number of cutting emissions, workload, cutting fluid every 3 months or so to discharge an update, usually should be regular pH and concentration monitoring box liquid, and adding ES-732 Microemulsion Cutting Fluid aluminum, retain the necessary concentration.
Matters needing attention
●If the goods in the cooler temperature stratification or thickening. But not the product performance change. Before use, the heating to room temperature . Stir and use.
●Cutting liquid with good if it is not used for a long time in the machine, should be regularly carried out air circulation and oxygenation of the tank liquid.
●6.3 summer high temperature, grinding fluid use cycle and antirust period than other season is short, please use.
●this product should be stored in dry, cool, ventilated warehouse, avoid the solarization, drench to storage, storage temperature of 0~40℃.
●For the special material of aluminum, copper alloy, suggest to do experimental corrosive.
Packaging
25KG/ barrel; 200KG/ barrel
