Displacing type rust preventive oil
Product brief introduction
This product is composed of petroleum solvents, dehydrating agent, anti-rust agent, curing agents, preservatives and other solvent type soft film antirust oil, no consumption of atmospheric ozone and greenhouse effect, non-toxic side effects on the human body, no pollution to the environment, is environmentally friendly products.
Product features
●Can the replacement residue in the water film on the surface of metal parts processing, metal processing parts in removing residues on the surface of the fingerprint and perspiration, and form a layer of oil film on metal surface, corrosion protection of metal is not affected by damp and corrosive gas.
●with flow excellent ductility, the blind hole, slot, groove metal parts and other parts to be protected.
●has good acid, alkali, salt spray and heat performance.
●protection period for different environment, temperature, humidity, corrosive difference, usually 6-12 months.
●need to be cleaned with solvent or alkaline cleaning agent can remove.
Use
●Suitable for steel, alloy steel, cast steel, copper, aluminum and its alloys rust.
●suitable for metal parts processing machinery processing, automobile, electronics, iron and steel, metallurgy, aviation industry in the process of rust and antirust, short-term stock.
Method of use
●The water rinse clean metal parts in the product of dehydration, immersion time is 2-3 minutes, for a small, slot and cavity parts should pay attention to flip, to ensure complete dehydration.
●check whether the metal parts surface blisters, bubble, oil film is uniform, complete.
●dehydration tank should be tapered, under the drain valve, so that water in the bottom sediment removal, timely water discharged. From the bottom of oil tank dewatering height should be separated disc set active metal mesh or porous, so as to ensure the water layer metal parts in contact with the bottom not.
●do not need cleaning components can adopt spray, dip, painted directly for antirust treatment.
●according to the requirement of process implementation of natural dry or drying, drying.
●according to the requirement of process implementation of the follow-up process.
Matters needing attention
●The use of the environment should have better ventilation condition, must keep away from fire.
●should be used to avoid the long time contact with skin; gloves Shangnai solvent when necessary.
●If accidentally splashed into the eyes, please rinse with water.
●sealed storage in a cool, ventilated place, do not contact with the high temperature heat source, avoid sun exposure.
Package specification
20L/ barrel; 200L/ barrel