Air conditioning heat radiating aluminum fin cleaning agent
Product brief introduction
This product is a special formula containing acid, specifically designed for cleaning a variety of air-conditioning heat dissipation aluminum fin and development, energy security, and quickly remove the oxide layer and dirt, but also its clean, bright surface, the heat recovery function.
Product features
●Strength: role of rapid, just 3-5 minutes, can be aluminum fin clean, reduce the waiting time.
●Economy: according to the actual situation may be diluted with water, the resulting foam can be attached to a vertical surface, reducing waste.
●Security: do not burn, and is suitable for various occasions.
Use
For cleaning air conditioner coil and radiating finned aluminum etc..
Method of use
●General aluminum cleaning and bright treatment: diluted with water spraying spray washing, brushing, so that the liquid and the cleaned surface of 3-5 minutes, then rinse with water pressure.
●On the oxidation of severity or pit surface : ES-322 solution or diluent and the cleaned surface contact for 3-5 minutes, then rinse thoroughly with water, if the effect is not ideal, can be repeated once a dilution solution.
●Air conditioning heat exchange coil: spray or spray can be sprayed on the surface of the coil ES-322 dilution, contact 3-5 minutes later, flushing with high pressure water gun, to remove the coil, can be diluted to soak 2-3 minutes remove with it and then rinse off.
Matters needing attention
●This product is alkaline, not a long time contact with the skin, use recommendations with rubber gloves.
●If it gets into the eyes, please rinse with water.
●In the cold region and below the freezing point storage, may make this product to freeze or thickening, but the same performance.
●Storage, if the precipitate precipitation, affecting the performance of the product, please use the former to stir.
Package specification
Net weight: 200kg/ barrel，25kg/ barrel，Plastic packing barrel
